TM 5-3805-296-23-4
0276
REMOVAL CONTINUED
NOTE
Cap and plug all lines and fittings to prevent fluid loss.
Note routing of hydraulic lines to aid in installation.
Mark and tag hydraulic lines to aid in installation.
Note location and quantity of tiedown straps to aid in installation.
19. Loosen tube nut (Figure 8, Item 1) and remove line (Figure 8, Item 4) from pressure-reducing valve and plate
assembly (Figure 8, Item 7).
20. Remove O-ring (Figure 8, Item 8) from fitting (Figure 8, Item 9). Discard O-ring.
21. Remove three nuts (Figure 8, Item 3) and washers (Figure 8, Item 2) from pressure-reducing valve and plate
assembly (Figure 8, Item 7).
22. Remove two bolts (Figure 8, Item 5) and washers (Figure 8, Item 6) from pressure-reducing valve and plate
assembly (Figure 8, Item 7).
23. Remove tiedown strap (Figure 8, Item 10) from wiring harness (Figure 8, Item 11) and disconnect wiring
harness connector (Figure 8, Item 12) from pressure-reducing valve (Figure 8, Item 13).
24. Remove pressure-reducing valve and plate assembly (Figure 8, Item 7) from machine.
Figure 8. Rear of Transmission.
0276