TM 5-3805-296-23-4
0240
ENGINE OIL COOLER BYPASS INSTALLATION
000240
1. Install two new O-rings (Figure 8, Items 2 and 6), elbow pipe (Figure 8, Item 1), and four bolts
(Figure 8, Items 3 and 5) on engine.
2. Install two new O-rings (Figure 9, Item 7) on tube (Figure 8, Item 4).
3. Install tube (Figure 8, Item 4) on elbow pipe (Figure 8, Item 1).
4. Install plunger (Figure 9, Item 2), spring (Figure 9, Item 3), new gasket (Figure 9, Item 4), cap (Figure 9,
Item 5), two washers (Figure 9, Item 6), and bolts (Figure 9, Item 7) on oil cooler bypass manifold
(Figure 9, Item 1).
Figure 9. Plunger.
0240
