TM 5-3805-296-23-2
0109
Table 1. Torque Converter Oil Temperature Too High Continued.
0109
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 7. Verify Malfunction is
Torque Converter Oil
Resolved.
Temperature Too High
1. Turn battery disconnect switch to
Continued
ON position and start engine
(TM 5-3805-296-10).
2. On MSD, select Cat Monitoring
System 621G (Figure 5, Item 1).
3. On MSD, select Information
(Figure 5, Item 1), Status
(Figure 5, Item 2), and Status
Group #6 (Figure 5, Item 4).
4. Allow machine to reach normal
Oil Temperature Normal
operating temperature
Troubleshooting complete.
(TM 5-3805-296-10). Operate
Oil Temperature High Repeat
machine in each gear while
troubleshooting from the beginning.
monitoring torque converter oil
temperature
(Figure 5, Item 3). The torque
converter oil temperature gauge
on the instrument cluster should
correspond as follows:
Minimum 113.0F (45C).
Midpoint 194.0F (90C).
Red Zone 264.2F (129C).
Maximum 293.0F (145C).
0109-10