TM 5-3805-296-23-2
0109
Table 1. Torque Converter Oil Temperature Too High Continued.
0109
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Torque Converter Oil
Temperature Too High
Continued
WARNING
DO NOT service cooling system unless engine has been allowed to cool
down. This is a pressurized cooling system and escaping steam or hot
coolant will cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow
engine to cool down. Loosen cap to first stop and let any pressure out of
cooling system, then remove cap. Failure to follow this warning may
cause serious burns.
Wear effective eye, hand, and skin protection when handling coolants.
Failure to do so may cause injury to personnel.
Dispose of all fluids according to local regulations and mandates.
Failure to follow these warnings may cause injury to personnel.
5. Drain some coolant from engine
Engine Coolant and Transmission
cooling system into a suitable
Oil Mixture Not Identified Install
container (WP 0256) and inspect
crankcase guard and plate (WP 0374).
for engine coolant and
Fill transmission oil to proper level
transmission oil mixture.
(WP 0265). Refill engine coolant
(WP 0256).
Proceed to Test Step 7.
Engine Coolant and Transmission
Oil Mixture Identified Replace
transmission oil cooler (WP 0243).
Replace transmission oil (WP 0265).
Replace transmission oil filter
(WP 0285).
Drain and refill engine coolant
(WP 0256).
Proceed to Test Step 7.
0109-6