TM 5-3805-296-23-2
0109
Table 1. Torque Converter Oil Temperature Too High Continued.
0109
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Inspect Transmission
Torque Converter Oil
Oil Tubes and Hoses for Damage and
Temperature Too High
Restrictions.
Continued
WARNING
Hot transmission components can cause injury from burns. Before
performing maintenance on machine, allow transmission components to
cool. Failure to follow this warning may result in injury to personnel.
1. Lower crankcase guard and plate
(WP 0374).
2. Inspect all transmission oil tubes
Tube(s)/Hose(s) Damaged or
(Figure 1 and Figure 2, Item 1),
Restricted Repair or replace as
hoses (Figure 1 and Figure 2,
necessary (WP 0280). Install crankcase
Item 2), and connections
guard and plate (WP 0374).
(Figure 1 and Figure 2, Item 3) for
Proceed to Test Step 7.
damage and restrictions
No Problem Found Proceed to Test
(WP 0280).
Step 5.
Test Step 5. Inspect Transmission
Oil for Contamination.
1. Remove transmission oil filter
Oil and Filter OK Proceed to step 2.
(WP 0285) and inspect filter and oil
Oil Contaminated Replace
for aluminum particles, black
transmission assembly (WP 0264).
nonmetallic particles, rubber
Replace transmission oil cooler
particles, shiny steel particles, and
(WP 0243). Replace transmission oil
iron or steel chips.
(WP 0265).
Proceed to Test Step 7.
2. Inspect transmission oil for
Oil OK Install transmission oil filter
discoloration and burnt odor.
(WP 0285). Proceed to Test Step 6.
Compare with clean transmission
Oil Discolored or Has Burnt Odor
oil.
Replace transmission oil (WP 0265).
Replace transmission oil filter
(WP 0285).
Proceed to Test Step 6.
0109-7