TM 5-3805-296-23-2
0109
Table 1. Torque Converter Oil Temperature Too High.
0109
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Torque Converter Oil
Test Step 1. Check for Active Codes.
Temperature Too High
1. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
2. At MSD, check for active
Diagnostic Code(s) Active
diagnostic code(s) (WP 0008).
Diagnose and repair active diagnostic
code(s) (WP 0005).
Proceed to Test Step 7.
No Diagnostic Code(s) Active
Proceed to step 3.
3. At MSD, check for active event
Event Code(s) Active Diagnose and
code(s) (WP 0008).
repair active event code(s) (WP 0005).
Proceed to Test Step 7.
No Event Code(s) Active Proceed to
Test Step 2.
Test Step 2. Check Engine Coolant
Temperature.
1. Start engine and allow machine to
reach normal operating
temperature (TM 5-3805-296-10).
Coolant Temperature Normal
2. Verify if engine coolant
Proceed to Test Step 3.
temperature is also running high
Coolant Temperature High
(TM 5-3805-296-10).
Diagnose and repair cause of high
engine coolant temperature (WP 0102).
Proceed to Test Step 7.