TM 5-3805-296-23-2
0108
Table 1. Transmission Fails To Shift, Shifts Improperly, or Fails To Operate in One
or More Gears - Continued.
0108
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Transmission Fails To Shift,
WARNING
Shifts Improperly, or Fails to
Operate in One or More
Gears Continued
DO NOT service cooling system unless engine has been allowed to cool
down. This is a pressurized cooling system and escaping steam or hot
coolant will cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow
engine to cool down. Loosen cap to first stop and let any pressure out of
cooling system, then remove cap. Failure to follow this warning may
cause serious burns.
Wear effective eye, hand, and skin protection when handling coolants.
Failure to do so may cause injury to personnel.
Dispose of all fluids according to local regulations and mandates.
Failure to follow these warnings may cause injury to personnel.
4. Drain some coolant from engine
Engine Coolant And Transmission
cooling system into a suitable
Oil Mixture Not Identified Install
container (WP 0256) and inspect
for engine coolant and
Fill transmission oil to proper level
transmission oil mixture.
(WP 0265). Refill engine coolant
(WP 0256).
Proceed to Test Step 7.
Engine Coolant And Transmission
Oil Mixture Identified Replace
transmission oil cooler (WP 0243).
Replace transmission oil (WP 0265).
Replace transmission oil filter
(WP 0285).
Drain and refill engine coolant
(WP 0256).
Proceed to Test Step 7.
Test Step 7. Verify Malfunction is
Resolved.
1. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-296-10).
2. Operate machine in each gear
Transmission Operates Properly
(TM 5-3805-296-10).
Troubleshooting complete.
Transmission Fails to Shift, Shifts
Improperly, or Fails to Operate in One
or More Gears Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0108-12