TM 5-3805-296-23-2
0108
Table 1. Transmission Fails To Shift, Shifts Improperly, or Fails To Operate in One
or More Gears - Continued.
0108
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Transmission Fails To Shift,
Test Step 4. Inspect Transmission
Shifts Improperly, or Fails to
Oil for Contamination.
Operate in One or More
Gears Continued
WARNING
Contact with transmission oil can damage skin. Wear gloves when
handling transmission oil. If oil contacts skin, wash immediately.
Lubrication oil is slippery. Immediately wipe up any spills.
Failure to follow these warnings may cause injury to personnel.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove transmission oil filter
Oil and Filter OK Proceed to step 3.
(WP 0285) and inspect filter and oil
Oil Contaminated Replace
for aluminum particles, black
transmission assembly (WP 0264).
nonmetallic particles, rubber
Replace transmission oil cooler
particles, shiny steel particles, and
(WP 0243). Replace transmission oil
iron or steel chips.
(WP 0265).
Proceed to Test Step 7.
Oil OK Install transmission oil filter
3. Inspect transmission oil for
(WP 0285). Proceed to Test Step 6.
discoloration and burnt odor.
Oil Discolored or Has Burnt Odor
Compare with clean transmission
Replace transmission oil (WP 0265).
oil.
Replace transmission oil filter
(WP 0285).
Proceed to Test Step 5.
0108-8
