TM 5-3805-296-23-2
0104
Table 1. Engine Will Not Crank Continued.
0104
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine WIll Not Crank
4. Connect clamp (Figure 9, Item 2)
Continued
of ammeter (Figure 9, Item 1)
around positive battery cable
(Figure 9, Item 3) with arrow
(Figure 9, Item 4) facing direction
of current flow (away from battery).
CAUTION
Do not crank engine for more than 30 seconds. Allow starter to cool for
two minutes before cranking again. Failure to follow this caution may
result in damage to equipment.
5. View ammeter (Figure 9, Item 1)
Amperage Greater Than 800 Amps
while assistant turns ignition switch
Turn ignition switch and battery
disconnect switch to OFF position
to start engine
(TM 5-3805-296-10).
(TM 5-3805-296-10).
Proceed to Test Step 9.
Amperage 65 to 800 Amps Turn
ignition switch and battery disconnect
switch to OFF position
(TM 5-3805-296-10).
Proceed to Test Step 10.
Amperage Less Than 65 Amps Turn
ignition switch and battery disconnect
switch to OFF position
(TM 5-3805-296-10).
Proceed to Test Step 19.
0104-12
