TM 5-3805-296-23-2
0085
Table 1. 1430 Scraper System Air Pressure Diagnostic Codes Continued.
085
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Test for Shorted Hitch
1430-04 Scraper Air
Wiring Harness.
Pressure Sensor Voltage
1. Lower left frame access plate
Below Normal Continued
(WP 0376).
2. Remove four bolts
(Figure 4, Item 1), washers
(Figure 4, Item 2), bushings
(Figure 4, Item 3), and splash
shield (Figure 4, Item 4) from
machine.
Figure 4. Splash Shield and Retaining Hardware.
0085
3. Disconnect connector E-C3
(WP 0012, Figure 142) from
connector J-C6
(WP 0012, Figure 141).
4. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 7.
terminal 26 (WP 0012, Figure 143)
No Continuity Proceed to step 5.
and all other terminals in
connector E-C2
(WP 0012, Figure 143).
5. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C3
Proceed to Test Step 7.
terminal 21 (WP 0012, Figure 142)
No Continuity Proceed to step 6.
and all other terminals in
connector E-C3
(WP 0012, Figure 142).
