TM 5-3805-296-23-2
0083
Table 1. 1295 Apron Float Indicator Diagnostic Codes Continued.
083
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
DIAGNOSTIC CODE SET CONDITION
1295-06 Apron Float Lamp
Transmission/Chassis ECM Detects Abnormally High Current on Apron Float
Current Above Normal
Continued
Lamp Circuit R745 During Lamp Test or Apron Float Operation.
POSSIBLE CAUSE
Apron Float LED Shorted.
Dash Wiring Harness Shorted.
Main Cab Wiring Harness Shorted.
Transmission/Chassis ECM.
Test Step 1. Test for Shorted Apron
Float LED.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector P-C22 from
instrument panel. Remove apron
float LED from connector P-C22
(WP 0506) (Figure 3).
3. Disconnect connector P-C26 from
instrument panel. Remove throttle
lock LED from connector P-C26
and install LED on connector
P-C22 (WP 0506) (Figure 3).
Figure 3. Connector P-C26 and Connector P-C22 on Instrument Panel.
0083
