TM 5-3805-296-23-2
0081
Table 1. 1293 Cushion Hitch Push Switch Diagnostic Codes Continued.
081
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
4. On MSD, select applicable status
1293-07 Cushion Hitch
Switch Status Changes Each Time
group (Figure 6, Item 1). View
Switch Mechanical System
Jumper Wire is Connected and
Cushion Hitch Switch status
Not Responding
Disconnected Replace implement
(Figure 6, Item 2) while performing
Continued
control joystick (WP 0503).
the following:
Proceed to Test Step 4.
a. Connect jumper wire between
Switch Status Fails to Change Each
terminal 5 and terminal 8
Time Jumper Wire is Connected and
of connector CG-C14
Disconnected Replace transmission/
(WP 0012, Figure 302).
chassis ECM (WP 0495).
Proceed to Test Step 4.
b. Remove jumper wire from
terminal 5 and terminal 8
of connector CG-C14
(WP 0012, Figure 302).
c.
Connect jumper wire between
terminal 5 and terminal 9
of connector CG-C14
(WP 0012, Figure 302).
d. Remove jumper wire from
terminal 5 and terminal 9
of connector CG-C14
(WP 0012, Figure 302).
0081-18
