TM 5-3805-296-23-2
0081
Table 1. 1293 Cushion Hitch Push Switch Diagnostic Codes Continued.
081
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 1. Check for Other Active
1293-07 Cushion Hitch
Codes.
Switch Mechanical System
1. Turn battery disconnect switch and
Not Responding
ignition switch to ON position
Continued
(TM 5-3805-296-10).
2. Check for active diagnostic code
1293-3 Cushion Hitch Switch Voltage
1293-3 Cushion Hitch Switch
Above Normal Active Diagnose and
Voltage Above Normal or code
repair active code as described in this
1293-4 Cushion Hitch Switch
work package.
Voltage Below Normal in
1293-4 Cushion Hitch Switch Voltage
transmission/chassis ECM
Below Normal Active Diagnose and
(WP 0008).
repair active code as described in this
work package.
Only 1293-7 Cushion Hitch Switch
Mechanical System Not Responding
Active Proceed to Test Step 2.
Test Step 2. Inspect Implement
Control Joystick Assembly.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Inspect implement control joystick
Joystick Assembly OK Proceed to
assembly for damage (WP 0503).
step 3.
Joystick Assembly Damaged
Replace implement control joystick
(WP 0503).
Proceed to Test Step 4.
3. Press and release cushion hitch
Button Operates Properly Proceed
button several times
to Test Step 3.
(TM 5-3805-296-10).
Button Fails to Operate Properly
Replace implement control joystick
(WP 0503).
Proceed to Test Step 4.
Test Step 3. Test Function of XMSN
Gear Hold Switch Circuits.
1. Disconnect connector CG-C14
(WP 0012, Figure 302) from
implement control joystick
connector (WP 0012, Figure 300).
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
0081-16
