TM 5-3805-296-23-2
0075
Table 1. 1280 Ejector Reverse Proportional Solenoid Diagnostic Codes Continued.
075
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
3. Remove four bolts
1280-06 Ejector Reverse
(Figure 8, Item 2), washers
Solenoid Current Above
(Figure 8, Item 1), and cover
Normal Continued
(Figure 8, Item 3) from machine.
Figure 8. Cover.
0075
4. Disconnect connector F-C5
(WP 0012, Figure 156) from
ejector reverse solenoid connector
(WP 0012, Figure 155).
5. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
6. At MSD, check for active
1280-5 Ejector Reverse Solenoid
diagnostic code 1280-6 Ejector
Current Below Normal Becomes
Reverse Solenoid Current Above
Active Replace ejector reverse
Normal (WP 0008).
solenoid (WP 0439).
Proceed to Test Step 6.
1280-6 Ejector Reverse Solenoid
Current Above Normal Remains
Active Proceed to Test Step 2.
