TM 5-3805-296-23-2
0075
Table 1. 1280 Ejector Reverse Proportional Solenoid Diagnostic Codes Continued.
075
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted
1280-06 Ejector Reverse
Implement Wiring Harness.
Solenoid Current Above
1. Turn ignition switch and battery
Normal Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector F-C8
(WP 0012, Figure 146)
from connector AE-C5
(WP 0012, Figure 145).
3. Using digital multimeter
Continuity Replace implement wiring
(WP 0540), test for continuity
harness (WP 0349).
between connector F-C8
Proceed to Test Step 6.
terminal 4 (WP 0012, Figure 146)
No Continuity Proceed to step 4.
and all other terminals
in connector F-C8
(WP 0012, Figure 146).
4. Using digital multimeter
Continuity Replace implement wiring
(WP 0540), test for continuity
harness (WP 0349).
between connector F-C8
Proceed to Test Step 6.
terminal 4 (WP 0012, Figure 146)
No Continuity Proceed to Test
and ground.
Step 3.
Test Step 3. Test for Shorted Draft
Frame and Bowl Side Wiring
Harness.
1. Disconnect connector AE-C1
(WP 0012, Figure 144)
from connector E-C2
(WP 0012, Figure 143).
2. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0348).
between connector AE-C1
Proceed to Test Step 6.
terminal 4 (WP 0012, Figure 144)
No Continuity Proceed to step 3.
and all other terminals
in connector AE-C1
(WP 0012, Figure 144).
3. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0348).
between connector AE-C1
Proceed to Test Step 6.
terminal 4 (WP 0012, Figure 144)
No Continuity Proceed to Test
and ground.
Step 4.
0075-17
