TM 5-3805-296-23-2
0070
Table 1. 1275 Bowl Up Proportional Solenoid Diagnostic Codes Continued.
070
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Test for Shorted Hitch
1275-06 Bowl Up Solenoid
Wiring Harness.
Current Above Normal
1. Lower left frame access plate
Continued
(WP 0376).
2. Remove four bolts
(Figure 6, Item 1), washers
(Figure 6, Item 2), bushings
(Figure 6, Item 3), and splash
shield (Figure 6, Item 4) from
machine.
Figure 6. Splash Shield and Retaining Hardware.
0070
3. Disconnect connector E-C1
(WP 0012, Figure 140)
from connector W-C3
(WP 0012, Figure 139).
4. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 6.
terminal 6 (WP 0012, Figure 143)
No Continuity Proceed to step 5.
and all other terminals
in connector E-C2
(WP 0012, Figure 143).
5. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 6.
terminal 6 (WP 0012, Figure 143)
No Continuity Proceed to Test
and ground.
Step 5.