TM 5-3805-296-23-2
0069
Table 1. 0968 Transmission Hold Indicator Diagnostic Codes Continued.
069
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 1. Test for Open Gear Hold
0968-05 Gear Hold Lamp
LED.
Current Below Normal
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector P-C29 from
instrument panel. Remove gear
hold LED from connector P-C29
(WP 0506) (Figure 2).
3. Disconnect connector P-C26 from
instrument panel. Remove throttle
lock LED from connector P-C26
and install LED on connector
P-C29 (WP 0506) (Figure 2).
Figure 2. Connector P-C26 and Connector P-C29 on Instrument Panel.
0069
4. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
5. At MSD, check for active
968-5 Gear Hold Lamp Current Below
diagnostic code 968-5 Gear Hold
Normal Becomes Inactive Replace
Lamp Current Below Normal
gear hold LED (WP 0506).
(WP 0008).
Proceed to Test Step 4.
968-5 Gear Hold Lamp Current Below
Normal Remains Active Proceed to
Test Step 2.