TM 5-3805-296-23-1
0063
Table 1. 0673 Transmission Speed Sensor Diagnostic Code Continued.
063
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0673-02 Speed Sensor 2
Test Step 1. Inspect Transmission
Incorrect Signal Continued Speed Sensor B for Damage.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove three bolts
(Figure 1, Item 3), washers
(Figure 1, Item 2), and cover
(Figure 1, Item 1) from machine.
Figure 1. Cover and Retaining Hardware.
0063
3. Disconnect connector A-C17
(WP 0012, Figure 118) from
transmission speed sensor B
connector (WP 0012, Figure 117).
4. Inspect transmission speed sensor
Sensor Damaged Replace
B for damage (WP 0288).
transmission speed sensor B
(WP 0288).
Proceed to Test Step 22.
No Problem Found Proceed to
step 5.
5. Inspect harness connector A-C17
Wiring Harness/Connector Damaged
(WP 0012, Figure 118) for
Replace transmission wiring harness
damage IAW Electrical General
(WP 0266).
Maintenance Instructions
Proceed to Test Step 22.
(WP 0540).
No Problem Found Proceed to Test
Step 2.
