TM 5-3805-296-23-1
0060
Table 1. 0585 Transmission Speed Sensor Diagnostic Code Continued.
060
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0585-02 Speed Sensor 1
Test Step 1. Inspect Transmission
Incorrect Signal Continued Speed Sensor A for Damage.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove three bolts
(Figure 1, Item 3), washers
(Figure 1, Item 2), and cover
(Figure 1, Item 1) from machine.
Figure 1. Cover and Retaining Hardware.
0060
3. Disconnect connector A-C13
(WP 0012, Figure 116) from
transmission speed sensor A
connector (WP 0012, Figure 115).
4. Inspect transmission speed sensor
Sensor Damaged Replace
A for damage (WP 0288).
transmission speed sensor A
(WP 0288).
Proceed to Test Step 22.
No Problem Found Proceed to
step 5.
5. Inspect harness connector A-C13
Wiring Harness/Connector Damaged
(WP 0012, Figure 116) for damage
Replace transmission wiring harness
IAW Electrical General
(WP 0266).
Maintenance Instructions
Proceed to Test Step 22.
(WP 0540).
No Problem Found Proceed to Test
Step 2.