TM 5-3805-296-23-1
0036
Table 1. 0549 Throttle Lock Diagnostic Code Continued.
036
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 10. Test for Shorted Fuse
0549-02 Throttle Lock
Panel Wiring Harness.
Enable Switch Erratic,
1. Turn ignition switch and battery
Intermittent, or Incorrect
disconnect switch to OFF position
Continued
(TM 5-3805-296-10).
2. Disconnect connector CG-C1
(WP 0012, Figure 283)
from connector W-C8
(WP 0012, Figure 282).
3. Using digital multimeter
Continuity Replace fuse panel wiring
(WP 0540), test for continuity
harness (WP 0515).
between connector CG-C1
Proceed to Test Step 19.
terminal 63 (WP 0012, Figure 283)
No Continuity Proceed to step 4.
and all other terminals
in connector CG-C1
(WP 0012, Figure 283).
4. Using digital multimeter
Continuity Replace fuse panel wiring
(WP 0540), test for continuity
harness (WP 0515).
between connector CG-C1
Proceed to Test Step 19.
terminal 63 (WP 0012, Figure 283)
No Continuity Proceed to Test
and ground.
Step 11.
Test Step 11. Test Fuse Panel Wiring
Harness for High Resistance or
Open.
1. Connect jumper wire between
terminal 1 and terminal 3
of connector CG-C7
(WP 0012, Figure 307).
2. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 12.
between connector CG-C1
Resistance Greater Than 5.0 Ohms
terminal 63 and terminal 65
Replace fuse panel wiring harness
(WP 0012, Figure 283).
(WP 0515).
Proceed to Test Step 19.
Test Step 12. Test for Shorted Main
Cab Wiring Harness.
1. Remove jumper wire from terminal
1 and terminal 3 of connector CG-
C7 (WP 0012, Figure 307).
2. Disconnect connector W-C16
(WP 0012, Figure 87)
from connector CL-C3
(WP 0012, Figure 86).
0036-9