TM 5-3805-296-23-1
0036
Table 1. 0549 Throttle Lock Diagnostic Code Continued.
036
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
3. Using digital multimeter
0549-02 Throttle Lock
Continuity Replace main cab wiring
(WP 0540), test for continuity
Enable Switch Erratic,
harness (WP 0505).
between connector W-C8
Intermittent, or Incorrect
Proceed to Test Step 19.
terminal 63 (WP 0012, Figure 282)
Continued
No Continuity Proceed to step 4.
and all other terminals
in connector W-C8
(WP 0012, Figure 282).
4. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C16
Proceed to Test Step 19.
terminal 6 (WP 0012, Figure 87)
No Continuity Proceed to step 5.
and all other terminals
in connector W-C16
(WP 0012, Figure 87).
5. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C16
Proceed to Test Step 19.
terminal 6 (WP 0012, Figure 87)
No Continuity Proceed to Test
and ground.
Step 13.
Test Step 13. Test Main Cab Wiring
Harness for High Resistance or
Open.
1. Connect jumper wire between
terminal 63 and terminal 65
of connector W-C8
(WP 0012, Figure 282).
2. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 14.
between connector W-C16
Resistance Greater Than 5.0 Ohms
terminal 5 and terminal 6
Replace main cab wiring harness
(WP 0012, Figure 87).
(WP 0505).
Proceed to Test Step 19.
0036-10