TM 3-4240-302-30&P-1
LOCATION
ITEM
ACTION
REMOVAL
Panel
HORN OFF switch K2
1. Disassemble CCM (p. 2-77).
CAUTION
Apply heat sink pliers to leads of diodes
when unsoldering. Excessive heat will
damage the diodes.
2. Unsolder and tag wire leads and diodes from
HORN OFF switch (1).
3. Remove nut (2) and switch (1).
INSTALLATION
1. Insert HORN OFF switch (1) in panel (3) and
secure with nut (2).
CAUTION
Apply heat sink pliers to leads of diodes
when soldering. Excessive heat will
damage the diodes.
CAUTION
Diodes must be connected properly or
damage to circuitry will result. Observe
the banded end of the diodes.
2. Connect and solder wires and diodes to
HORN OFF switch. Refer to wiring diagram
3. Reassemble CCM (p. 2-77).
2-95