TM 3-4240-302-30&P-1
LOCATION
ITEM
ACTION
REMOVAL
Panel
ENTRANCE PRESSURE
1. Disassemble CCM (p. 2-77).
circuit breaker CB6
2. Remove and tag wire leads from ENTRANCE
PRESSURE circuit breaker CB6 (1).
3. Unscrew and remove waterproof boot (2), if
present.
4. Remove circuit breaker CB6 (1) and keying
washer (3).
INSTALLATION
1. Insert ENTRANCE PRESSURE circuit breaker
CB6 (1) with keying washer (3) in panel (4) and
secure with waterproof boot (2), if necessary.
2. Connect wire leads. Refer to wiring diagram
3. Reassemble CCM (p. 2-77).
2-89