TM 9-6230-210-13&P
3.11 LEVEL
This task covers:
a. Service
b. Replace
INITIAL SETUP
Tools
Personnel Required
Ratchet, 1/4-inch drive (item 9, sect III, appx B)
MOS 63B Lightweight Vehicle and Power Generation
Mechanic
Flat tip screwdriver, 4-inch (item 7, sect III, appx B)
Materials/Parts
Soap (item 20, appx E)
Water
Rags (item 18, appx E)
SERVICE
LEGEND
1 LEVEL
2 NUT
3 WASHER
4 SCREW
5 TRAILER BED
a. Clean level (1) glass using a dean rag dampened in a soap and water solution.
REPLACE
a.
b.
c.
d.
e.
Remove nuts (2), washers (3), and slotted head screws (4).
Remove level (1) from trailer bed (5).
Replace unserviceable level with a serviceable item from stock.
Position level (1) in place on trailer bed.
DO NOT overtighten. Overtightening may crack or break level glass.
Install level, using slotted head screws (4), washers (3), and nuts (2), and tighten.
3-23/(3-24 blank)
