WARNING
TM 9-6230-210-13&P
LEGEND
1 STEEL BANDS
2 LID
1 Cut steel bands (1) from each of the three shipping containers.
2 Remove lids (2).
b. Checking Unpacked Equipment.
(1) Upon receipt of the Floodlight Set, check the condition of the shipping materials. Check each pallet, box, and
container to determine if the contents are adequately packaged to prevent damage. Also check to see if matings on
the containers are legible.
(2) Inspect the euipment for damage incurred during shipment. If the equipment has been damaged, report the
damage on SF 364, Report of Discrepancy.
(3) Check the equipment against the packing slips to see if the shipment is compete. Report all discrepancies
in accordance with the instructions of DA Pam 738-750 or DA Pam 738-751 as applicable.
c. Processing Unpacked Equipment.
(1) The following tools are required to process the equipment.
(2) All processing of unpacked equipment will be conducted by an MOS 63B technician.
Electrolyte is ACID and highly corrosive. Wear rubber gloves, face shield, and apron
and handle with extreme care while filling the battery with electrolyte. DO NOT permit
smoking or an open flame nearby while servicing battery.
(3) Electrolyte is used in processing the battery.
4.6 INSTALLATION INSTRUCTIONS.
a. Tools and materials. Tool and materials required for installation areas follows:
(1) Tools.
(2) Materials.
4-5
