3
1
2
3
2
TM 9-4940-568-34
7-12
7-3. CYLINDER BLOCK REPAIR AND DE-GLAZING INSTRUCTIONS (CONT).
(10)
Operate sizing hone similar to Flexi-Hone.
Inspect bore after 10 strokes.
(11)
Remove tape from lubricating holes and
tappet holes.
d.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply sealant to expansion plugs (3).
(2)
Install expansion plugs (3) into passages
until flush with countersink in cylinder
block (2).
(3)
Apply sealant around outside diameter of
camshaft expansion plug (1).