TM 9-4940-568-34
5-44
5-7. CYLINDER HEAD REPLACEMENT (CONT).
NOTE
Atomizer opening at end of
fitting must point straight up
when installed in cylinder head.
(4)
Install adapter (3), ether tube (2) and fitting
(1) on engine cylinder head (4).
d.
Follow-On Maintenance:
Install exhaust manifold, (TM 9-4940-568-20).
Install engine rocker arm, (TM 9-4940-568-20).
Install engine fan hub, (TM 9-4940-568-20).
Install engine fan, (TM 9-4940-568-20).
Install thermostat, (TM 9-4940-568-20).
Install engine drive belt tensioner, (TM 9-4940-568-20).
Install engine drive belt, (TM 9-4940-568-20).
Install alternator, (TM 9-4940-568-20).
Install air intake manifold, (TM 9-4940-568-20).
Install fuel injector lines, (TM 9-4940-568-20).
Fill coolant, (TM 9-4940-568-20).
Install generator housing (if removed), (Para 5-2).
Connect batteries, (TM 9-4940-568-10).
Start generator and check operation, (TM 9-4940-568-10).
END OF TASK
2
4
3
1
