TM 9-4940-568-34
5-41
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Batteries disconnected, (TM 9-4940-568-10)
Generator housing removed (if necessary),
(Para 5-2)
Coolant drained, (TM 9-4940-568-20)
Fuel injector lines removed, (TM 9-4940-568-20)
Air intake manifold cover removed, (TM 9-4940-568-20)
Alternator removed, (TM 9-4940-568-20)
Engine drive belt removed, (TM 9-4940-568-20)
Engine drive belt tensioner removed,
(TM 9-4940-568-20)
Thermostat removed, (TM 9-4940-568-20)
Engine fan removed, (TM 9-4940-568-20)
Engine rocker arm removed, (TM 9-4940-568-20)
Engine fan hub removed, (TM 9-4940-568-20)
Exhaust manifold removed, (TM 9-4940-568-20)
Tools and Special Tools
Tool Kit, General Mechanics
(Item 67, Appendix F)
Straight Edge (Item 59, Appendix F)
Wrench, Torque (0 to 175 lb-ft. [0 to 237 N.m])
(Item 83, Appendix F)
5-7. CYLINDER HEAD REPLACEMENT.
Personnel Required
Two
Materials/Parts
Rags, Wiping (Item 23, Appendix B)
Sealing Compound (Item 32, Appendix B)
Tags, Identification (Item 36, Appendix B)
Gasket, Cylinder Head
(Item 18, Appendix E)
a.
Removal.
2
4
3
1
Ensure engine is cool before performing this task or injury to personnel may result.
(1)
Remove fitting (1), ether tube (2) and adapter (3) from engine cylinder head (4).
