TM 9-4940-568-34
5-40
5-6. TIMING PIN REPLACEMENT (CONT).
b.
Installation.
NOTE
Ensure Cylinder No. 1 is at TDC
and timing pin hole can be seen
through Front Gear Housing.
(1)
Position gasket (6), timing pin assembly (5)
and two screws (4) on gear housing (7). Do
not tighten screws.
(2)
Hold timing pin (A) in hole (B) in camshaft
gear to align timing pin with housing.
Tighten two screws (4) to 48 lb-in (5 N.m).
Ensure to disengage (pullout)
timing pin to prevent damage to
equipment.
(3)
Disengage (pullout) timing pin (5).
(4)
Install front gear cover (Para 5-14).
(5)
If removed install hydraulic pump assembly
(Para 4-2).
c.
Follow-On Maintenance:
Connect batteries, (TM 9-4940-568-10).
Install rear panel, (TM 9-4940-568-10).
END OF TASK
5
4
7
6
A
B
