TM 9-4940-568-34
3-110
3-32. CROSS-RELIEF VALVE REPLACEMENT (Continued)
b.
Installation
NOTE
Lubricate all preformed packings
with clean hydraulic oil.
(1) Install two preformed packings (15) on
motor (14).
(2) Apply primer to mounting surface of
cross relief valve (8), screw heads (12)
and lockwashers (13).
(3) Install cross-relief valve (8) on motor
(14) with four lockwashers (13) and
screws (12).
(4) Install preformed packing (10) and tube
(9) on elbow (11).
(5) Install preformed packing (7) and
adapter (6) on cross-relief valve (8).
(6) Install preformed packing (5) and tube
(4) on adapter (6).
(7) Install preformed packing (2) and hose
(1) on elbow (3).
END OF TASK
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
