TM 9-4940-568-20
11-46
11-12. PNEUMATIC HOSE REEL AND 3/8” HOSE REPAIR (CONT).
(4)
Coat threads of adapter (11) with sealing
compound.
(5)
Install adapter (11) and hose fitting (10) on
hose reel assembly (5).
Hose reel assembly is under
pressure. Avoid releasing
latching mechanism during
removal and installation. Failure
to comply could result in injury
to personnel.
NOTE
Prior to hose installation it is
necessary to preload the hose reel
assembly. Perform Step (6) to
preload the hose reel assembly.
(6)
Manually turn hose reel (5) until spring is
tight, back off three turns, and then latch.
(7)
Route hose (4) through hose reel assembly
(5) and tighten nut (9).
(8)
Install two u-bolts (8), four washers (7) and
locknuts (6) on hose reel assembly (5).
4
9
10
11
5
7
7
6
6
8
