8
9
10
6
13
14
15
16
3
3
17
TM 9-4940-568-20
11-43
d. Assembly.
NOTE
Prior to assembly, coat latch pawl
with grease.
(1)
Install latch pawl (14) on hose reel base (3),
and secure with hex nut (17).
(2)
Install spring (13), washer (16) and screw
(15) on hose reel base (3).
(3)
Install spring (13) on latch pawl (14).
Use care when removing or
installing retaining rings. Retaining
rings are under spring tension and
can act as projectiles when released
and could cause eye injury.
NOTE
Prior to assembly, coat main shaft
with grease.
(4)
Install main shaft (12) on spring case (6),
with snap ring (11).
