TM 9-4940-568-20
8-106
8-33. ENGINE THERMOSTAT AND FRONT LIFTING BRACKET REPLACEMENT (CONT).
b. Installation.
4
2
1
9
5
6
8
3
7
5
10
11
(1)
Position lifting bracket (10), seal (9), thermostat (8) and thermostat housing (5) on engine (11).
NOTE
Align tang on thermostat with notch in housing.
(2)
Install thermostat housing (5) using two screws (6) and screw (7). Tighten screws to 18 lb-ft (24 N.m).
(3)
Install radiator hose (4) on thermostat housing (5) and tighten hose clamp (3).
(4)
Install upper alternator mount bracket (2) using three capscrews (1). Tighten screws to 18 lb-ft (24 N.m).
c.
Follow-On Maintenance:
Install alternator, (Para 8-42).
Cooling system filled, (Para 8-25).
Connect batteries, (TM 9-4940-568-10).
Start generator and check for leaks, (TM 9-4940-568-10).
END OF TASK
