TM 9-4940-568-20
8-101
b. Installation.
NOTE
Install cable ties as required.
If pulley was removed, perform
Steps (1) and (2).
(1)
Using care to align holes, install spacer (8)
and pulley (9).
(2)
Install engine accessory drive belt (7) (Para
8-31).
Use caution to prevent damage to
radiator.
(3)
Install fan (6) with four screws (4) and
washers (5).
(4)
Install fan shroud (2) on fan housing (3)
with five screws (1). Tighten screws to 18
lb-ft (24 N.m).
c.
Follow-On Maintenance:
Connect batteries, (TM 9-4940-568-10).
Start engine and check operation of fan,
(TM 9-4940-568-10).
END OF TASK
5
4
6
8
7
9
3
1
2
