TM 9-4940-568-20
8-108
8-34. COOLANT TEMPERATURE SENDING UNIT REPLACEMENT (CONT).
b. Installation.
5
3
4
1
2
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well-ventilated area. If adhesive, solvent or sealing compound gets
on skin or clothing, wash immediately with soap and water.
(1)
Apply sealing compound to coolant temperature sending unit (4).
(2)
Install coolant temperature sending unit (4) on engine (5).
(3)
Install wire (3), washer (2) and nut (1) on coolant temperature sending unit (4).
c.
Follow-On Maintenance:
Fill cooling system, (Para 8-25)
Connect batteries, (TM 9-4940-568-10).
Start generator and check for leaks, (TM 9-4940-568-10).
END OF TASK
