TM 9-4940-568-20
8-29
(4)
Loosen screw (5) and remove wire (6) from
ether start switch (4).
(5)
Loosen screw (7) and remove wire (8) from
ether start switch (4).
b. Installation.
(1)
Install jam nut (9) against ether start switch
(4).
(2)
Position ether start switch (4) in instrument
panel door (2).
(3)
Install outer nut (3) on ether start switch (4).
(4)
Tighten outer nut (3) until nut is tight against
instument panel (2).
(5)
Install wire (8) and tighten screw (7) on
ether start switch (4).
(6)
Install wire (6) and tighten screw (5) on
ether start switch (4).
4
5
7
6
8
4
5
7
6
8
9
3
4
2
