TM 9-4940-568-20
8-34
8-11. ENGINE EXHAUST MANIFOLD REPLACEMENT (CONT).
b. Installation.
5
2
1
4
7
6
3
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors, and are
harmful to the skin and clothing. To avoid injury or death, keep away from open fire and use in
well–ventilated area. If adhesive, solvent or sealing compound gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply anti-seize compound to threads of screws (5).
(2)
Install four manifold gaskets (6) and exhaust manifold (5) using eight screws (5). Tighten screws to 32
lb-ft (43 N.m).
(3)
Install four screws (1), washers (2) and exhaust gasket (4) on exhaust pipe (3).
c.
Follow-On Maintenance:
Connect batteries, (TM 9-4940-568-10).
Start generator and check for leaks, (TM 9-4940-568-10).
END OF TASK
