TM 9-4940-568-20
8-24
Materials/Parts
Cable Ties (Item 10, Appendix C)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Batteries disconnected, (TM 9-4940-568-10)
Remove rear panel, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
Tool Kit, Electrical (Item 29, Appendix G)
8-8. ETHER STARTING AID REPLACEMENT.
Materials/Parts – Continued
Sealing Compound (Item 34, Appendix C)
Tags, Identification (Item 40, Appendix C)
a.
Removal.
8
4
7
2
3
9
1
5
7
6
Starting fluid is toxic and highly flammable. Container is pressurized. NEVER heat
container and NEVER discharge starting fluid in confined areas or near open flame.
Severe injury to personnel may result.
NOTE
Remove cable ties as necessary.
(1)
Remove generator circuit breaker panel as outlined in Engine Electronic Overspeed Module Replacement
(Para 8-16).
(2)
Remove two wingnuts (1) and clamp (2).
(3)
Remove ether supply cylinder (3) by turning counterclockwise from solenoid valve (4).
(4)
Remove two nuts (5), nuts (6), studs (7) and bracket (8) from generator panel (9).
