1
3
2
4
5
5
4
2
3
6
1
TM 9-4940-568-20
8-19
d. Assembly.
(1)
Install plunger (4) in bore of oil filter head
(5).
(2)
Install preformed packing (2) on plug (1)
and lubricate with clean engine oil.
(3)
Install spring (3), preformed packing (2) and
plug (1) on oil filter head (5). Tighten plug
to 60 ft-lb (80 N.m).
e. Installation.
NOTE
If using a new oil transfer
connection, ensure plugs are
removed.
(1)
Position gasket (6) and oil transfer
connection (5) on engine (4).
(2)
Install oil filter head gasket (3) and oil filter
head (1) on engine (4) with 14 screws (2).
Tighten screws to 18 ft-lb (24 N.m).
f.
Follow-On Maintenance:
Install oil pressure sending unit, (Para 8-37).
Install engine oil filter, (Para 8-5).
Fill coolant, (Para 8-25).
Start generator set and check for leaks (TM 9-4940-568-10).
END OF TASK
