TM 9-4940-568-20
8-16
8-5. ENGINE OIL AND OIL FILTER REPLACEMENT (CONT).
b. Installation.
2
1
1
(1)
Lubricate oil filter seal with clean engine oil.
(2)
Fill engine oil filter (1) 2/3 full with clean engine oil.
(3)
Install engine oil filter (1) on filter head (2).
Do not use oil filter removal tool to tighten engine oil filter or possible damage to filter
and filter head may result.
(4)
By hand, tighten engine oil filter (1) until it makes contact with filter head (2).
(5)
By hand, tighten engine oil filter (1) 2/3 turn after contact with filter head (2).
c.
Follow-On Maintenance:
Start and run generator for three minutes, (TM 9-4940-568-10).
Check for oil leaks, (TM 9-4940-568-10).
Shut OFF generator for at least 10 minutes, (TM 9-4940-568-10).
Check oil level and add engine oil as needed, (TM 9-4940-568-10).
Install front panel, (TM 9-4940-568-10).
END OF TASK
