TM 9-4940-568-20
5-52
5-12. REMOTE CONTROL BOX REPAIR (Continued)
(18) Install nut (12) and knob (13) on lever
assembly (10).
(19) Apply silicone compound to shaft of
lever assembly (10).
(20) Install preformed packing (11) on lever
assembly(10).
(21) Apply sealant to underside of head on
screw (9).
(22) Install lever assembly (10) on swing
controller (5) with screw (9).
(23) Coat both sides of gasket (8) with
sealant and install gasket (8) on swing
controller (5).
(24) Connect swing controller connector (6)
to connector (7).
(25) Install swing controller connector (6) on
studs (4) and remote control box (2) with
four locknuts (3).
NOTE
The inner two controllers
must be installed before
the outer two controllers.
(26) Repeat Steps (18 thru 25) for telescope
controller, hoist controller and boom
controller in that order.
(27) Stow remote control box (2) in stowage
box (TM 9-4940-568-10).
END OF TASK
Follow-On Maintenance
Operate crane to test
remote control
operation
(TM 9-4940-568-10)
