2
1
TM 9-4940-568-10
3-39
Table 3-1. Troubleshooting - CONT.
Malfunction
Test or Inspection
Corrective Action
CRANE (CONT)
7.
MAST, OUTRIGGERS OR STABILIZERS EXTEND OR RETRACT SLOW OR
ABNORMAL (CONT).
NOTE
On the FRS, the crane must be in the stowed position when checking hydraulic oil level.
Hydraulic oil must be at operating temperature.
Step 3. Check the hydraulic oil level in sight glass (1) on hydraulic reservoir (2). Oil level should
be between add and full marks.
If oil level is low, add oil (Appendix G).
If oil level is OK, notify Unit Maintenance.
