7
8
6
2
1
3
TM 9-4940-568-10
2-113
b.
Tank Installation.
Ensure tank standard cap is installed on tank prior to removing or installing pressurized
tanks. Failure to comply may result in injury or death to personnel.
(1)
With the aid of an assistant, position tank (3) in tank brackets (8).
(2)
Rotate tank brackets (8) closed and install nuts (7). Do not tighten nuts.
NOTE
Position tank safety cap and regulator valve as noted during removal.
(3)
Remove standard cap from tank (3) and install tank safety cap (2) on tank.
(4)
Install hose assembly (6) on tank (3).
(5)
Position tank (3) and tighten nuts (7).
(6)
Close tank safety cap (2) and install pin (1).
