TM 9-2330-359-14&P
Section V. BODY MAINTENANCE
5-13. FLOOR REPLACEMENT.
This Task Covers:
Replacement
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
l Wheels chocked.
l General mechanic’s tool kit
s 1/4 in. apex bit (Item 1, Appendix D)
REPLACEMENT
1.
Remove screw (2) and damaged section of floor boards (1) from frame (3).
2.
Using floor boards (1) as a template, cut new floor boards.
3.
Place board (1) into position on crossmember (4).
4.
Drill 9/32 in. diameter hole through two boards (1) and crossmember (4).
NOTE
The cut ends of boards must be centered on a crossmember.
5.
Install new floor board (1) on frame (3) with screws (2).
6.
Repeat steps 1 through 3 for remaining boards (1) that were removed.
5-20
