TM 9-2330-324-14&P
0052
00-2
AXLE REPLACEMENT—Continued
0052
00
REMOVAL—Continued
4.
Loosen two nuts (6) and remove handbrake cable (3) from guide bracket (5) on backing plate (10).
N O T E
A suitable container should be used to catch any draining brake fluid.
Ensure that all spills are cleaned up.
5.
Loosen nut (7) and disconnect tube (4) from connector (9).
6.
Remove 12 nuts (11), lockwashers (12), screws (8), and backing plate (10) from axle (2). Discard
lockwashers.
7.
Repeat steps 3 through 6 on opposite end of axle (2).
8
12
11
2
6
3
5
6
10
4
7
9
8.
Remove nut (13), lockwasher (14), clamp (15), nut (18), lockwasher (17), connector (16), and two
tubes (4) from axle (2). Discard lockwashers.
1817
15
14
2
13
4
16
4
