TM 9-2330-324-14&P
0052
00-3
AXLE REPLACEMENT—Continued
0052
00
REMOVAL—Continued
9.
Using floor jack, raise and support axle (2) at both ends. Remove eight locknuts (20), four U-bolts
(22), and two plates (19) from axle and springs (21). Discard locknuts.
10.
Carefully lower and remove axle (2) from springs (21).
21
20
19
2
22
CLEANING
1.
Remove dirt with water and brush.
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful t o
skin and clothing. To avoid injury or death, keep away from open fire and
use in a well-ventilated area. If solvent gets on skin or clothing, wash
immediately with soap and water.
2.
Remove grease from axle and wheel retaining parts with cleaning solvent.
