TM 9-2330-238-14
5-24. SASH ASSEMBLY
MAINTENANCE
(M313).
This Task Covers:
a.
Removal
c.
Assembly
b.
Disassembly
d.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
l Adhesive
(Item 1, Appendix
E)
l General mechanic’s
tool kit
l One sash seal
l Four rivets
1.
Remove eighteen
screws (11) and window
and frame assembly
(18) from door (3).
2.
Remove
15 screws
(1), guide (2), and blackout
panel (9) from inside of door (3).
1.
Remove screws
(10), separate
window
glass (14), and frame assembly
(18). Remove seal (16) from window
glass.
2.
Turn two latches
(17) holding
lower end of brush screen (15) to frame assembly
(18) 180° and remove brush
screen.
3.
Remove plastic
cord retainer (4) from edge of screen (5) and remove screen from frame assembly
(18).
4.
Open window
and remove sash seal (19) with knife. Discard sash seal.
5.
Remove four rivets (13) securing
hinge (12) and remove hinge. Discard rivets.
6.
Remove four screws
(7), nuts (8), and window
operator
(6) from frame assembly
(18).
1.
Position window
operator
(6) in place in frame assembly
(18) and install four screws (7) and nuts (8).
2.
Position
hinge (12) in place and install four new rivets (13).
3.
Install new sash seal (19) with adhesive
on window.
4.
Position
screen (5) in place on frame assembly
(18) and install plastic
cord retainer (4).
5.
Position brush screen (15) in place on frame assembly
(18), and turn two latches (17)
180° to secure lower end
of brush screen.
6.
Install seal (16) on window
glass (14). Position window
glass in frame assembly (18)
and install screws (10).
1.
2.
5-70
Position
blackout
panel (9) and guide (2) in place on inside of door (3). Install 15 screws (1) to secure.
Install window and frame assembly
(18) in place in window opening of door (3) and secure with eighteen screws
(11).
