TM 9-2330-238-14
5-26. HINGED ROOF MAINTENANCE (M313) (Con’t).
4.
Inspect clamp assemblies for cracks, bends or breaks. If defective, perform steps 5-8. If okay, go to step 9.
5.
Remove cotter pin (13) and headed straight pin (42) from handle (36). Remove handle, eyebolt (33), and nut (15)
from clevis (14) and discard cotter pin.
6.
Inspect holder assemblies (38) for cracks, bends, or breaks. If defective, remove two screws (37) and replace
holder assemblies.
7.
Drive out pin (43) and remove handle (36) from yoke (44). Discard pin (43) and replace damaged parts.
8.
Position handle (36) on yoke (44) and install new pin (43). Position handle, eyebolt (33), and nut (15) on clevis
(14) and install headed straight pin (42) and new cotter pin (13).
TA702106
5-75
