TM 9-2330-238-14
5-22. LEFT REAR DOOR LOCK REPLACEMENT
(M313, EARLY MODEL)
(Con’t).
2.
Inspect case assembly
for ease of operation.
3.
Inspect
locking
rods, locking
bolts, and guide brackets
for cracks,
bends,
or breaks.
Straighten
any minor
bends.
4.
Inspect catch strikes for cracks or excessive
wear.
5.
Replace
any defective
parts.
1.
Position three catch strikes (3) in place on door (6) and install six screws (2).
2.
Position case assembly
(8) and two guide brackets
(5) in place on door (6) and install twelve screws (14).
3.
Position door handle (12) in place on shaft of case assembly
(8) and install grooved headless
straight pin (13).
4.
Position upper and lower locking rods (7 and 9) on upper and lower locking bolts (4 and 10). Install two screws
(1) with assembled
washers.
5.
Install upper and lower locking bolts (4 and 10) in guide brackets (5) and upper and lower locking rods (7 and 9)
on case assembly
(8).
6.
Connect
upper and lower locking
rods (7 and 9) in case assembly
(8) with two new cotter pins (11).
7,
Lubricate
case assembly
(8) in accordance
with Lubrication
Instructions
(Chapter 3, Section I).
5-65
