TM 9-2330-238-14
5-21. LEFT REAR DOOR LOCK REPLACEMENT
(M313, LATE MODEL).
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning
and Inspection
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
l Dry cleaning
solvent (Item 14, Appendix
E)
l General mechanics
tool kit
l Two Iockwashers
Remove two capscrews
(10) and Iockwashers
(9)
1.
from upper and lower connecting
links (5 and 7)
and upper and lower door bolts (4 and 8). Discard
Iockwashers.
2.
Drive out grooved
headless
straight
pin (2) and
remove door handle (1) from center case (11).
3.
Remove twelve screws (3), center case (11), and
upper and lower door bolts (4 and 8) from door (6).
WARNING
Dry cleaning solvent, P-D-680,
is toxic and flammable.
Always wear protective goggles
and gloves, and use only in a well-ventilated
area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvents
flash point is 100°F-138°F
(38°C-59°C).
If you become
dizzy while
using cleaning solvent, Immediately
get fresh air and medical help. If solvent contacts
eyes, immediately
wash your eyes and get medical aid.
1.
Clean all parts with dry cleaning
solvent and dry thoroughly.
5-62
TA702100
